Monday, February 26, 2024
HomeiOS DevelopmentRewriting SpeakerClock in SwiftUI | Cocoanetics

Rewriting SpeakerClock in SwiftUI | Cocoanetics


Once I began out growing iOS apps, 11 years in the past I put a number of apps on the App Retailer. Since they turned fewer and fewer because the earnings from them didn’t warrant updating them. Amongst these my most profitable one was iWoman, which I bought in 2015. My second-most-valuable (by way of income) remained my beloved SpeakerClock, the final app standing.

I had left SpeakerClock on-line for the primary cause that it saved producing like a mean of $100 per thirty days, even with out me doing something on it. For that cause, I didn’t need to make it free, however reasonably put it to a comparatively excessive price ticket of $5. There’s additionally an In-App-Buy of one other $5. I figured “why kill the cow whereas it nonetheless produces some tasty milk”.

The opposite aspect impact of those worth tags was that – I consider – solely individuals who actually wished what the app was providing would really buy it. My philosophy with this talking timer was to have the largest LED digits attainable, with the performance that helps the talking fashion of TED Talks, which traditionally have defaulted to a most size of 18 minutes.

Some crashes launched by new iOS variations precipitated me to do small bug fixing releases (for iOS 3 in 2010, iOS 5 in 2011, and 2017 for iOS 10). Additionally, trying again on the launch notes of these variations, I had made this actual promise:

“We now have completely modernised the code base in order that we will deliver you some thrilling new options within the subsequent main launch”

However I didn’t lie with this assertion, a “subsequent main” launch would have been model 2.0. However I didn’t ever dare to show the model quantity up that top. I solely elevated the third digit of the model quantity.

Apple did drive me to do a brand new construct finally, after they cracked down on apps which weren’t up to date in too lengthy a time. And the newest replace they did themselves, when the Apple certificates had expired they usually re-signed my app on their servers with out me doing something.

Enter SwiftUI

Over the previous couple of months, I’ve grown very keen on SwiftUI. Being a developer on Apple platforms for greater than a decade made me fairly bored with having to maintain writing the identical MVC code numerous occasions. And that might solely get you want normal performance, nothing actually thrilling. So I jumped on the likelihood when considered one of my shoppers requested me to implement a brand new iOS Widget in SwiftUI, within the fall of 2020. Apple had turned to SwiftUI as the one manner you can create such widgets due to SwiftUIs potential to provide and protect a static view hierarchy which the system may present to the person at sure factors in a timeline with out substantial energy utilization.

My shopper was comfortable in regards to the outcome and so I used to be tasked with the following stage of SwiftUI improvement. I wanted to implement a watchOS app, additionally completely in SwiftUI. Growth was fairly much like the widget, however this time I additionally wanted to cope with person interplay and communication with the iOS counterpart app. That every one took some a couple of months greater than the widget, however once more elevated my SwiftUI expertise tremendously.

After having delivered the watch app, I had a little bit additional time out there to do one thing for myself. I do have another concepts for apps, however my ideas turned to SpeakerClock. I figured that this extremely customized UI would lend itself properly to be applied in SwiftUI.

Paths in Shapes

An important asset within the legacy code was the drawing of the large purple LED digits and the way they prepare themselves in portrait versus panorama, in a pleasant animation. So my first SwiftUI view was one which had a Path ingredient with the SwiftUI instructions including the trail parts to make up the person bars of the LED. My first error right here involved utilizing a GeometryReader to find out the scale of the trail. The LED digits have a set side ratio and the drawing coordinates are based mostly on these.

struct LEDDigit: View
{
   var digit: Int? = nil
	
   var physique: some View
   {
      GeometryReader { proxy in
         let (w, h) = proxy.unitSize

         // high horizontal line
         Path { path in
            path.transfer(to: CGPoint(x: 24 * w, y: 7 * h))
            path.addLine(to: CGPoint(x: 60 * w, y: 7 * h))
            path.addLine(to: CGPoint(x: 62 * w, y: 10 * h))
            path.addLine(to: CGPoint(x: 57 * w, y: 15 * h))
            path.addLine(to: CGPoint(x: 24 * w, y: 15 * h))
            path.addLine(to: CGPoint(x: 21 * w, y: 10 * h))
            path.closeSubpath()
         }
         .activeLEDEffect(when: [0, 2, 3, 5, 7, 8, 9].comprises(digit))
         ...
}

Whereas this produces the proper output, it causes the person Paths to animate individually when rotating the machine. I solved this drawback by transferring the person path’s code right into a Form the place I’m including the bars solely based mostly on whether or not I’m on the lookout for the lively or inactive LED parts. The trail(in rect: CGRect) operate fingers us the required measurement, so we don’t a GeometryReader any extra.

struct LEDDigitShape: Form
{
   var digit: Int? = nil
   var isActive: Bool
	
   func path(in rect: CGRect) -> Path
   {
      let w = rect.measurement.width / 73
      let h = rect.measurement.top / 110
		
      var path = Path()
		
      // high horizontal line
		
      if [0, 2, 3, 5, 7, 8, 9].comprises(digit) == isActive
      {
         path.transfer(to: CGPoint(x: 24 * w, y: 7 * h))
         path.addLine(to: CGPoint(x: 60 * w, y: 7 * h))
         path.addLine(to: CGPoint(x: 62 * w, y: 10 * h))
         path.addLine(to: CGPoint(x: 57 * w, y: 15 * h))
         path.addLine(to: CGPoint(x: 24 * w, y: 15 * h))
         path.addLine(to: CGPoint(x: 21 * w, y: 10 * h))
         path.closeSubpath()
      }
      ...
}

That is used such:

struct LEDDigit: View
{
   var digit: Int? = nil
	
   var physique: some View
   {
   ZStack
   {
      LEDDigitShape(digit: digit, dot: dot, isActive: false)
         .activeLEDEffect(isActive: false)
      LEDDigitShape(digit: digit, dot: dot, isActive: true)
         .activeLEDEffect(isActive: true)
   }
}

The 2 members of the ZStack draw all of the inactive LED parts behind the lively LED parts. It nonetheless wanted to be two Shapes as a result of one form can solely have a single drawing fashion. The inactive parts are merely crammed in a grey. The lively parts are stuffed with purple and have a purple glow round them simulating some radiance.

With this strategy a digit is all the time drawn in its entirety which lends itself to easy resizing.

Format and Orientation Woes

The subsequent step was to combination a number of LED digits and lay them out over the display screen with completely different positions for panorama and portrait orientations, with a easy animation whenever you rotate the machine.

I’ve principally two layouts:

  1. Hour digits, Colon, Minute digits (in a HStack)- in horizontal format with the outer sides touching the protected space insets
  2. A VStack of Hour digits and Minute digits – in vertical format

Sounds simple, however my makes an attempt with HStacks and VStacks failed miserably. At the start of the rotation animation the digits would all the time get a really small body increasing into the ultimate one.

I can solely think about that in some way the SwiftUI format system doesn’t do not forget that these are the identical views. So I attempted giving them static identifiers and I additionally tried geometry matching. However I couldn’t shake these animation artefacts. There have to be some piece lacking in my understanding about view id.

Ultimately I got here again to doing my very own format inside a GeometryReader, setting body’s width/top and acceptable offsets (i.e. translation) for particular person parts. This works very properly and in addition lets me have a separate animation for the opacity of the colon.

The colon sticks to the correct aspect of the hour digits and disappears in portrait format. By sorting view modifiers in a sure manner I used to be capable of get this impact that the colon fades in with a slight delay.

var physique: some View
{
   GeometryReader { proxy in
			
   let digitSize = self.digitSize(proxy: proxy)
   let colonSize = self.colonSize(proxy: proxy)
   let centeringOffset = self.centeringOffset(proxy: proxy)
   let isLandscape = proxy.isLandscape
			
   let timerSize = self.timerSize(proxy: proxy)
			
   Group
   {
      LEDNumber(worth: mannequin.countdown.minutes)
      .body(width: digitSize.width * 2, top: digitSize.top)
      .animation(nil)
				
      LEDColon()
      .body(width: colonSize.width, top: colonSize.top)
      .offset(x: digitSize.width * 2, y: 0)
      .animation(nil)
      .opacity(isLandscape ? 1 : 0)
      .animation(isPadOrPhone ? (isLandscape ? .easeInOut.delay(0.2) 
                              : .easeInOut) : nil)
				
      LEDNumber(worth: mannequin.countdown.seconds)
      .body(width: digitSize.width * 2, top: digitSize.top)
      .offset(x: isLandscape ? digitSize.width * 2 + colonSize.width : 0,
              y: isLandscape ? 0 : digitSize.top)
      .animation(nil)
   }
   .offset(x: centeringOffset.width,
           y: centeringOffset.top)

You may see that I’m particularly disabling animation with .animation(nil) for probably the most components as a result of I discovered that the animation in any other case is all the time out of sync with the rotation resizing animation. The LED colon alternatively has its personal animation with a further delay of 0.2 seconds.

The second cause why I explicitly disabled animations is as a result of on the Mac model these animations would lag behind the resizing of the app’s window. This resizing additionally switches between each layouts relying on the way you drag the window nook, kind of like “responsive design” as we have now seen on HTML internet pages. Extra on Mac issues additional down beneath.

Multi-Modal Buttons

One other problem that had me attempt a number of approaches involved the preset buttons (high left) and visitors gentle buttons (heart backside). These buttons have a distinct operate for a single faucet (choose) versus an extended press (set).

The primary drawback is that you just can not have a easy .onLongPressGesture as a result of this prevents the conventional faucets from being dealt with. One strategy is to have a .simultaneousGesture for the lengthy press, however then the faucet motion is executed proper (i.e. “simultaneous”) after the lengthy press motion should you elevate the finger over the button. The opposite strategy is to make use of a .highPriorityGesture which once more disables the built-in faucet.

I ended up with the next strategy which makes use of the gesture masks to selectively disable the lengthy press gesture if there isn’t a lengthy press motion and to disable the faucet gesture if an extended press was detected.

struct LEDButton<Content material: View>: View
{
   var motion: ()->()
   var longPressAction: (()->())?
   @ViewBuilder var content material: ()->Content material
	
   @State fileprivate var didLongPress = false
	
   var physique: some View
   {
      Button(motion: {}, label: content material)  // will need to have empty motion
      .contentShape(Circle())
      .buttonStyle(PlainButtonStyle())   // wanted for Mac
      .simultaneousGesture(LongPressGesture().onEnded({ _ in
         didLongPress = true
         longPressAction!()
         didLongPress = false
      }), together with: longPressAction != nil ? .all : .subviews)
      .highPriorityGesture(TapGesture().onEnded({ _ in
         motion()
      }), together with: didLongPress ? .subviews : .all)
   }
}

This strategy makes use of a customized TapGesture in tandem with the LongPressGesture. A @State variable retains observe of the lengthy press. We do must reset didLongPress to false or else all subsequent faucets would proceed to be ignored. I discovered that I don’t want a dispatch async for placing it again to false.

I consider that the explanation for that’s that the primary setting of the variable causes the physique to be up to date and thus the together with: to disable the faucet gesture whereas in progress. Thus the faucet doesn’t fireplace upon releasing the lengthy press. Good to know: The .all allows the gesture and the .subviews disables a gesture.

Opposite to different approaches I’ve seen on the web this strategy preserves the usual habits of Button for highlighting, When you press a customized button like this, it makes it barely clear.

A Mac Model – For Free?

The massive promise of SwiftUI is that you’d get a Mac model of your app for little additional work, successfully “totally free”. So I made a decision to place this to the check additionally produce a macOS model. I set the focused gadgets to iPhone, iPad, Mac and selected the “Optimize Interface for Mac” as a result of that sounded to me like the higher outcome.

This optimized mode precipitated some points for my customized buttons, as a result of they bought changed with empty spherical rects destroying my customized look. You may forestall this modification by including .buttonStyle(PlainButtonStyle()).

Other than this my code actually did run as a local Mac app fairly properly. Behind the scenes although it’s all Mac Catalyst. As I perceive it, meaning UIKit continues to be on the helm, on Mac only a macOS model of it.

I left the code signing settings alone as I wished to have customers be capable of set up the Mac and iOS variations with the identical buy. This “common buy” is enabled by having the identical bundle identifier for each variations.

Some very minor tweaks have been required for adjusting some minimal and most button sizes. There’s a bug on macOS that stumped me for some time. Solely on Mac I discovered that after I tapped in sure spots in my app this may trigger gestures to cease working. Then after I triggered a brand new format by resizing the window, all the things returned again to regular.

My workaround for this was to connect the Pan Gesture (for setting the timer) solely to the LED digits. This manner there isn’t a interference and all buttons proceed to work usually. The system may get confused by having too many conflicting gestures on high of one another.

A side-effect of the Mac model is that you just begin to connect keyboard shortcuts to buttons. This was additionally a cause why I wished to get Button to work with faucet and lengthy press versus making a customized view that isn’t a button.

let title = "(index+1)"

PresetButton()
.keyboardShortcut(KeyEquivalent(title.first!), modifiers: [.command])

This manner you’ll be able to set off the preset buttons additionally with COMMAND plus quantity. And never only for the Mac app, however that works for iPads with connected keyboard as nicely.

That bought me pondering, that possibly it will be nice to permit the area bar to cease/begin the timer, like we’re used to from video gamers. For that function I’ve an empty fully black button behind the LED digits:

Button(motion: { mannequin.isTimerActive.toggle() },
       label: {
          Rectangle()
          .foregroundColor(.black)
          .body(width: timerSize.width, top: timerSize.top)
          .onTapGesture(depend: 2) { mannequin.restoreGreenTime() }
       })
.keyboardShortcut(.area, modifiers: [])
.buttonStyle(PlainButtonStyle())

This button permits me so as to add a keyboard shortcut for area to behave the identical as a faucet. Curiously having a two-tap gesture connected to the Rectangle() poses no drawback.

I submitted the Mac construct proper after the one for iOS however initially bought a stunning rejection:

The person interface of your app isn’t in step with the macOS Human Interface Pointers. Particularly:

We discovered that the app comprises iOS contact management directions equivalent to faucet and swipe.

The explanation for that was that I put again the assistance display screen with a textual content I had beforehand written with iOS in thoughts. I wanted to switch mentions of swiping with dragging and as a substitute of tapping you’re clicking. I’ve onerous coded the textual content and formatting for now and with and #if I can swap the textual content between a model for Mac and one for iOS.

Group
{
   Textual content("Setting the Timer")
   .font(.headline)
   .padding(.backside, 5)
						
#if targetEnvironment(macCatalyst)
   Textual content("To regulate the timer, click on on the LED digits and drag horizontally.")
   .font(.physique)
   .padding(.backside, 5)
#else
   Textual content("To regulate the timer swipe left and proper.")
   .font(.physique)
   .padding(.backside, 5)
#endif					
}

As soon as I had made these modifications the Mac app was permitted in a short time.

Conclusion

I’ve skilled first hand how I can rewrite an app in SwiftUI and the nice pleasure that may be had from deleting all of your crufty Goal-C code when doing so.

SwiftUI is my new love and this fashion my app is not a “little one from one other mom”. This restores some enthusiasm in me to really lastly actually add some long-promised “thrilling new options”. For starters I’m pondering of getting a watchOS companion app which reveals the timer and means that you can distant management it. One other thought could be to retailer my presets on iCloud in order that they’re the identical on all my gadgets.

I might love to listen to from you what you consider the method of re-implementing components of apps and even complete apps in SwiftUI.



Additionally revealed on Medium.


Tagged as:

Classes: Updates

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments